Your Motorcycle Brake Maintenance Guide to Follow
Do you have to change the brake pads of your motorcycle every two to three months? If yes, then there might be a chance that you are mistaken about your bike’s brake maintenance. Just like you invest your hard-earned money in several bike spare parts online, similarly, the brake has different components. And, it’s not certain that every time brake pads have worn out. There might be other brake parts affected due to long usage, improper riding conditions, or due to wear and tear. So, in this blog, we provide you with essential motorcycle brake maintenance information and tips to follow to ensure a safe riding experience ahead.
Signs that showcase the bike’s brake require instant maintenance
Sometimes, you face the hassle of not stopping the bike instantly, while riding at high or slow speed. There might be some instances of brake leakage that you experience while riding during jam-packed conditions. Even, if there could be a scenario of pulling your brake lever in full force, still, it takes time to stop the bike. Many other signs like these showcase how to change your braking system with the required parts and much-needed online bike accessories.
For your assistance, we have gathered a few indicators for you to replace the brake parts.
1. Some kind of grinding noise: Sometimes, as a rider, when you apply a brake, you might hear a grinding or screeching sound. It’s not only you who hear that sound, even other people around hear it too. In such a scenario, you must understand the fact that something is wrong with your motorcycle’s braking system. A grinding sound indicates worn-out brake pads or rotors. This mechanical issue cannot be fixed with the help of a professional mechanic. It can only be fixed with the complete replacement of brake pads and brake rotors. If you try to keep riding with the worn-out brake pads, then there are high chances of meeting a fatal accident at any point in time. Therefore, it is of crucial concern to invest in genuine brake pads online.
2. Soft brake lever performance: Another clear sign of the bike’s brake maintenance and part replacement is the soft brake lever. You might feel a spongy experience, while pulling the brake lever and further find it difficult to stop the bike on time. If this happens, then brake pads are fully worn out along with overutilized brake wire. So, it demands the complete replacement of both parts with the help of a mechanic. You may also add add inside brake lever and wire to maintain the required lubrication effect.
3. Feeling a vibration: In case you feel some kind of vibration or pulsating effect while pulling the brake lever, then it’s a clear sign of a wrapped brake rotor. And, to fix the issue, you need to have the professional assistance of a mechanic. Well, this issue happens after prolonged usage of brakes, low maintenance, and overheating. Also, sometimes, replacing brake rotors is the only solution to fix the issue.
4. Longer stopping distance traveled: Certainly, if it takes more time to stop your motorcycle after applying both brakes, then there is a serious problem. There might be a chance that the brake lever, wire, pads, rotors, or anything is not performing up to an expected level. It even implies, low brake fluid in your motorcycle. As a result of all this, you find it difficult to stop the bike and ride safety.
5. Low brake fluid: Even brake fluid has of utmost role to play in maintaining the stopping efficiency of your motorcycle. As a rider, you can easily check the level of brake fluid in the container and fill it up with a quality product. Also, remember the fact that continuing to ride
with low brake fluid can adversely affect your brake pads, rotors, and levers. This might result in the complete replacement of the entire braking system.
6. Kind of weird smell while braking: Last but not least, some kind of unusual smell like that of a chemical or burning effect when applying brakes is a straightway sign of a mechanical problem. It happens after a prolonged usage of the same braking system for months and years. If you fail to take action on the weird smell, then your entire braking system might get affected.
Must-Follow Bike’s Brake Maintenance Tips
Besides the above tips, one needs to consider several ways of keeping the motorcycle brakes in good condition.
1. Check your brakes
Frequent inspection of your bike’s braking system may help detect some of these problems in time for remedies. You should check your brake pads, rotor, and lines for any damages and replace them when due.
2. Check your lever and pedal
Checking both the rear brake pedal and the front brake lever is necessary when riding a bike with a dual brake. It is important to test the foot pedal at the rear in case of problems. However, ensure you push the steering wheel back so that it doesn’t wobble. Check the condition of your brakes carefully and look out for anything like this before you set off on your journey. During a crash, the brake pedals can bend and affect the motorbike motor.
3. Do check the brake lines
A motorcycle’s brake system uses a series of repeated brake fluids in a loop which are also enclosed in fluid circuits. However, it is important to inspect brake lines for obvious cracks or signatures of leakage. Replace instantly any leaks or cracks on the brake lines as they can put your life at risk. Because brake lines are exposed they are subject to an element’s influence they can break or get damaged and start leaking fluid. Furthermore, the bleeds on many of the bikes can be faulty or wear and tear over time. In order not to make a mistake while changing the defective elements of the installation, it’s necessary first of all to determine the cause of the escape of liquid.
4. Use high-quality fluid
The kind of brake fluid, thus becomes very crucial in ensuring optimum efficiency and security in brake systems. Ensure you check on your owner’s manual for the recommendation regarding the type of brake fluid suitable for your bike or just stick to using that specific one.
5. Avoid brake overheating
Therefore, do not stay on the brakes for too long or go down steep slopes for long periods. Such an issue causes brakes to be overheated, which results in decreased efficiency of your brake system and damages.
6. Timely replace the brake pads
Whenever you notice that the brake pads are getting old and worn out, replace them immediately. It is dangerous to persist cycling with worn brake pads because it may cause inefficient braking thereby leading to a road accident. Generally, most manufacturers may recommend that you replace your brake pads every 1000–2,000 kilometers, however, this varies depending on how you ride and what type of brake pads are used. Replace the brake pads immediately if you notice signs of wear including soft brake lever and grinding noise.
Concluding Thoughts
Maintaining the safety of your motorcycle begins with the maintenance of its brakes; some tips on that matter. Attention to pads will lead to increased performance of the pads and improved safety for the rider. Accordingly, doing this allows you to drive safely as it enables your breaks to work correctly.
If you have a Hero Motocorp bike, then invest in high-quality braking parts online at the eShop Hero Motocorp platform. It’s a reliable website where you can buy an original and affordable range of motorcycle and scooter spare parts, accessories, and even two-wheelers. So, no need to go here and there in search of genuine two-wheeler parts and ride your vehicle with utmost efficiency.
